[*] Suggestions for PRI Media gateway products

[John Lange]

Thanks for all the suggestions guys. Looks like a dual port T1 Digium
card is going to be the easiest and most cost effective way to go.

John

On Wed, 2006-01-25 at 07:54 -0600, LES.NET (1996) INC. wrote:
> Dual PRI card and asterisk.
> 
> Plug the PSTN PRI into port 1, and plug a crossover cable from the 2nd
> port into the PBX.
> 
> Les.
> > I need a solution for taking a T1 PRI and splitting it in two
> > directions.
> >
> > 1) to another T1 PRI to feed a standard PBX phone system.
> >
> > 2) to convert to SIP.
> >
> > The idea is to have an incoming PRI feed both an Asterisk server (via
> > sip) and an existing PBX.
> >
> > Does anyone know what manufacturers make equipment which is suitable for
> > this?
> >
> > Thanks,
> > --
> > John Lange
> > OpenIT ltd. www.Open-IT.ca (204) 885 0872
> > VoIP, Web services, Linux Consulting, Server Co-Location
> >
> > _______________________________________________
> > Asterisk mailing list
> > Asterisk at muug.mb.ca
> > http://www.muug.mb.ca/mailman/listinfo/asterisk
> >
> 
>