[RndTbl] wireless N router recommendations?
Dan Keizer
ve4drk at gmail.com
Fri Sep 3 10:13:16 CDT 2010
your router is supported:
http://www.dd-wrt.com/site/support/router-database
i've used openwrt and dd-wrt and they are both quite good.
Dan.
On Fri, Sep 3, 2010 at 10:01 AM, Gilles Detillieux
<grdetil at scrc.umanitoba.ca> wrote:
> Thanks, Kevin and Steve. I would consider trying alternate firmware, or
> even looking for a Linksys firmware upgrade, if I suspected the firmware
> was the problem. But I have a 54G v8, not a 54GL or 54G v1-4, so the
> Linux-based firmware isn't likely to work with this. I had a 54G v5
> before this v8 model, and there was a reliability issue with it that was
> solved by a firmware upgrade. But that model packed it in a couple
> years ago, and the v8 that I got to replace it hasn't been as solid as
> the v5 was (at least before it packed it in). I did upgrade the Linksys
> firware on it once last year, and that didn't seem to make a difference,
> though it might be worth another look.
>
> I was just hoping for something a little faster, with better range, and
> hopefully a little more reliable, for a reasonable cost. The D-Link 655
> still sounds like it'll be worth a shot, though from what I heard on
> this forum I realize I shouldn't get my hopes up too high as far as the
> speed improvement is concerned.
>
> Thanks again,
> Gilles
>
> On 09/02/2010 09:05 PM, Kevin McGregor wrote:
>> FWIW, I use OpenWRT (www.openwrt.org <http://www.openwrt.org>) on a
>> WRT54GL, and it works very well. No pretty bandwidth graphs like tomato,
>> but pretty flexible.
>>
>> Kevin
>>
>> On Thu, Sep 2, 2010 at 3:33 PM, Steve Moffat <Steve.Moffat at ca.ibm.com
>> <mailto:Steve.Moffat at ca.ibm.com>> wrote:
>>
>> Hey Gilles;
>> Not sure if you have changed the firmware on your WRT54G, but I've been
>> using tomato for a couple of years now. It is rock solid and, in my
>> opinion, performs better than the original firmware.
>> You might give that a try.
>> http://www.polarcloud.com/tomato
>>
>> Steve Moffat
> ...
>> Message: 1
>> Date: Wed, 01 Sep 2010 16:55:27 -0500
>> From: Gilles Detillieux <grdetil at scrc.umanitoba.ca
>> <mailto:grdetil at scrc.umanitoba.ca>>
>> Subject: Re: [RndTbl] wireless N router recommendations?
>> To: Continuation of Round Table discussion <roundtable at muug.mb.ca
>> <mailto:roundtable at muug.mb.ca>>
>> Message-ID: <4C7ECBCF.6010501 at scrc.umanitoba.ca
>> <mailto:4C7ECBCF.6010501 at scrc.umanitoba.ca>>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>> Thanks, Mike and Sean, for your replies last Thursday. I had been
>> reasonably happy with my Linksys WRT54G until recently, but I find that
>> lately it needs to be reset more than I'd like (once or twice a week).
>> That and the wish for faster wireless data transfers (though no need yet
>> for streaming, so bursty traffic is OK) and hopefully a bit more range
>> prompted me to look into wireless N router options. I had been
>> considering the D-Link 655, even though it's not dual-band (and after
>> what Sean said, perhaps dual-band isn't worth the extra expense), so I
>> appreciate the positive feedback on this model. I'm inclined to give it
>> a shot.
>>
>> Thanks,
>> Gilles
>>
>> On 08/26/2010 04:32 PM, Mike Pfaiffer wrote:
>> > On 10-08-26 02:22 PM, Gilles Detillieux wrote:
>> >> I was talking to Gilbert about recommendations for wireless N
>> routers,
>> >> as I'm in the market for one. I'm not particularly interested in
>> >> running custom firmware (just need good, solid, secure and reliable
>> >> wireless LAN and basic Internet support), so this post is perhaps
>> >> slightly off-topic in this forum. But Gilbert did mention that
>> there
>> >> had been discussion at a recent meeting about Wireless N antenna
>> >> strength, and some recommendations (mostly negative) about specific
>> >> routers, though he couldn't recall specific brands mentioned.
>> >>
>> >> Any good dual-band models in the $70 to $130 price range?
>> >>
>> >> Thanks,
>> >> Gilles
>> >>
>> >
>> > I'm running a D-Link 655. It's OK. Reviews last year
>> put it
>> third from
>> > the top from what the reviewers were looking for. I have to agree
>> with
>> > Sean. I can connect a USB NIC to my Mint box and it works well but if
>> > there is a choice between G and N the NIC will choose G. To be fair I
>> > haven't tried to force an N connection. This particular router has
>> > gigabit (wired) capabilities. As to reliability... It was running
>> for a
>> > couple of months steady last winter.
>> >
>> > As coincidence would have it, I am running it now with
>> a test
>> machine.
>> > If you'd like to try it out as is and you happen to be in Windsor
>> Park
>> > just East of WPC it is there and open. No internet connection though.
>> > I've tried to make the SSID as obvious as possible. If you want
>> to make
>> > arrangements to see what it is like if we force an N connection,
>> let me
>> > know before Friday of next week when the machine goes back.
>> >
>> > Later
>> > Mike
>
> --
> Gilles R. Detillieux E-mail: <grdetil at scrc.umanitoba.ca>
> Spinal Cord Research Centre WWW: http://www.scrc.umanitoba.ca/
> Dept. Physiology, U. of Manitoba Winnipeg, MB R3E 0J9 (Canada)
> _______________________________________________
> Roundtable mailing list
> Roundtable at muug.mb.ca
> http://www.muug.mb.ca/mailman/listinfo/roundtable
>
More information about the Roundtable
mailing list