[RndTbl] Who has the hardware/know-how to read a miniature SD HC card used in CPAP machines?

[eh at eduardhiebert.com]

Can you or do you know of who has the hardware/know-how to read a 
miniature SD HC card used in CPAP machines?

Overall its but a tiny miniature approximation of the 3.5" square HD 
floppies measuring approximately 122x132mm  (7/8 x 1.25 inches).

In the further detail  the ResMed brand micro diskette labelled SD HC 
has a rectangular plastic disk frame.  The insert end has one corner 
notched off with a hyper small rectangular notch on the same long side 
edge similar to the old 7" floppies.  On the opposite long side it has a 
small slider to lock or unlock

Unlike the 3.5" floppies which have a slider that exposes the floppy, 
this one has 9 gold plated tabs at the notched end where 7 have a 
plastic insert divider and the 8th immediately below the notched off 
corner has two tabs for a total of 9 tab sections.