[RndTbl] Who has the hardware/know-how to read a miniature SD HC card used in CPAP machines?
Patrick Murphy
jvcpatrick at gmail.com
Sat Mar 11 09:06:27 CST 2023
And, although you probably know already, there is open source software
to read the CPAP data here:
https://www.sleepfiles.com/OSCAR/
On 3/10/2023 11:14 AM, eh at eduardhiebert.com wrote:
> Can you or do you know of who has the hardware/know-how to read a
> miniature SD HC card used in CPAP machines?
>
> Overall its but a tiny miniature approximation of the 3.5" square HD
> floppies measuring approximately 122x132mm (7/8 x 1.25 inches).
>
> In the further detail the ResMed brand micro diskette labelled SD HC
> has a rectangular plastic disk frame. The insert end has one corner
> notched off with a hyper small rectangular notch on the same long side
> edge similar to the old 7" floppies. On the opposite long side it has
> a small slider to lock or unlock
>
> Unlike the 3.5" floppies which have a slider that exposes the floppy,
> this one has 9 gold plated tabs at the notched end where 7 have a
> plastic insert divider and the 8th immediately below the notched off
> corner has two tabs for a total of 9 tab sections.
> _______________________________________________
> Roundtable mailing list
> Roundtable at muug.ca
> https://muug.ca/mailman/listinfo/roundtable
More information about the Roundtable
mailing list