[*] Shaw Digital Phone

[Paul]

You get an extremely loud disconnect tone after about 20 seconds or so.

- Paul


-----Original Message-----
From: asterisk-bounces at muug.mb.ca [mailto:asterisk-bounces at muug.mb.ca] On
Behalf Of John Lange
Sent: Friday, February 23, 2007 8:59 AM
To: asterisk at muug.mb.ca
Subject: RE: [*] Shaw Digital Phone

When the far end hangs, does the Shaw digital service give any
indication such as busy signal or a tone of some kind that indicates the
call has ended? Or is it just silence?

John

On Thu, 2007-02-22 at 16:33 -0600, Paul wrote:
> I did try several settings, nothing really seemed to fix it. 
> Silence detection would cause some calls to drop, so no go there.
> 
> I don't believe the Shaw "DPTs" (SBV5120/SBV5220 VoIP cable modems)
support
> the disconnect supervision. 
> 
> I haven't tried again recently.
> 
> -----Original Message-----
> From: Bill Reid [mailto:billreid at shaw.ca] 
> Sent: Thursday, February 22, 2007 9:44 AM
> To: Paul
> Cc: Asterisk at muug.mb.ca
> Subject: Re: [*] Shaw Digital Phone
> 
> Paul wrote:
> > My friend and I had an SPA 3k connected to SDP, the only major problem
we
> > had was the SPA not detecting a remote hang-up at all, it would simply
> stay
> > on hook. 
> 
> 
> That sounds like Shaw is not doing "disconnect supervision"
> 
> http://www.voip-info.org/wiki-Asterisk+Disconnect+Supervision
> 
> Did you play with the SPA3k PSTN Disconnect Detection settings? There are
a
> lot 
> of options to play with.
> 
> -- Bill
> 
> _______________________________________________
> Asterisk mailing list
> Asterisk at muug.mb.ca
> http://www.muug.mb.ca/mailman/listinfo/asterisk


_______________________________________________
Asterisk mailing list
Asterisk at muug.mb.ca
http://www.muug.mb.ca/mailman/listinfo/asterisk