[*] Shaw Digital Phone

LES.NET (1996) INC. voip at les.net
Fri Feb 23 17:07:29 CST 2007


If there isnt a proper disconnect, I'd question whether a traditional
answering machine would work on the service..
Les
-- 
For Canada/USA DID's, Call +1.888.VOIP.DID
Leslie Bester
LES.NET (1996) INC.
TollFree: +1.866.944.0009
Winnipeg: +1.204.944.0009


> That being the case then you can tweak Asterisk's disconnect supervision
> to detect the tone.
>
> Search for those terms in google and look in zapata.conf for the section
> starting with:
>
> ;callprogress=yes
> ;progzone=us
>
> The "signalling" setting and the "busydetect" will also play a role.
>
> I would suggest searching for your VoIP modems's docs online and see if
> you can figure out what signalling its using.
>
> Truth be told, this whole setup strikes me as completely sub-optimal to
> say the least. Why not just sign up with a VoIP provider and be done
> with it? Then you can go pure digital and avoid the sillyness.
>
> John
>
> On Fri, 2007-02-23 at 16:19 -0600, Paul wrote:
>> You get an extremely loud disconnect tone after about 20 seconds or so.
>>
>> - Paul
>>
>>
>> -----Original Message-----
>> From: asterisk-bounces at muug.mb.ca [mailto:asterisk-bounces at muug.mb.ca]
>> On
>> Behalf Of John Lange
>> Sent: Friday, February 23, 2007 8:59 AM
>> To: asterisk at muug.mb.ca
>> Subject: RE: [*] Shaw Digital Phone
>>
>> When the far end hangs, does the Shaw digital service give any
>> indication such as busy signal or a tone of some kind that indicates the
>> call has ended? Or is it just silence?
>>
>> John
>>
>> On Thu, 2007-02-22 at 16:33 -0600, Paul wrote:
>> > I did try several settings, nothing really seemed to fix it.
>> > Silence detection would cause some calls to drop, so no go there.
>> >
>> > I don't believe the Shaw "DPTs" (SBV5120/SBV5220 VoIP cable modems)
>> support
>> > the disconnect supervision.
>> >
>> > I haven't tried again recently.
>> >
>> > -----Original Message-----
>> > From: Bill Reid [mailto:billreid at shaw.ca]
>> > Sent: Thursday, February 22, 2007 9:44 AM
>> > To: Paul
>> > Cc: Asterisk at muug.mb.ca
>> > Subject: Re: [*] Shaw Digital Phone
>> >
>> > Paul wrote:
>> > > My friend and I had an SPA 3k connected to SDP, the only major
>> problem
>> we
>> > > had was the SPA not detecting a remote hang-up at all, it would
>> simply
>> > stay
>> > > on hook.
>> >
>> >
>> > That sounds like Shaw is not doing "disconnect supervision"
>> >
>> > http://www.voip-info.org/wiki-Asterisk+Disconnect+Supervision
>> >
>> > Did you play with the SPA3k PSTN Disconnect Detection settings? There
>> are
>> a
>> > lot
>> > of options to play with.
>> >
>> > -- Bill
>> >
>> > _______________________________________________
>> > Asterisk mailing list
>> > Asterisk at muug.mb.ca
>> > http://www.muug.mb.ca/mailman/listinfo/asterisk
>>
>>
>> _______________________________________________
>> Asterisk mailing list
>> Asterisk at muug.mb.ca
>> http://www.muug.mb.ca/mailman/listinfo/asterisk
>>
>> _______________________________________________
>> Asterisk mailing list
>> Asterisk at muug.mb.ca
>> http://www.muug.mb.ca/mailman/listinfo/asterisk
>
>
> _______________________________________________
> Asterisk mailing list
> Asterisk at muug.mb.ca
> http://www.muug.mb.ca/mailman/listinfo/asterisk
>



More information about the Asterisk mailing list